9 Inch Car Radio Fascia For Toyota Hilux N70 SR & Workmate with Manual Air Condition Knobs. 2012-2015 Models only.

Making upgrades easy..... 

Looking to upgrade your stereo in ride? need a great quality facia kit to keep that factory look and feel but also give you the ability to add in your aftermarket stereo with ease? Then your in the right place!

This facia kit is for designed specifically to fit your Hilux N70 and is made with OEM quality ABS Plastics and designed to exacting tolerances so that each kit matches perfectly with the Toyota's dash ensuring that your get the best look and feel from your dash kit and your aftermarket radio experience, as well as keeping that factory finish feel to your whole dash and system.

Always Disconnect the Ground terminal of car’s battery before head unit installation

2012-2015

4 Clips only hold frame and it just pops out – No air-con buttons require removing. 

Installation notes: 

-           Air vents from factory frame require relocation to the new frame

-           4 x Mounting clips require relocation to the new frame

-           If AC & Hazard switches are sticky, please trim / sand the surround and bottom of holes by 1-2 mm.

-           If AC & Hazard switches are loose when installed, please gently move out the holding clips slightly and use tape to hold them in position.

          Please install the sticker last after frame is installed in the car.

How to modify and install N70 Hilux AC and hazard Switch on 9" Extnix Frame Fascia

Note: As with all aftermarket kits there may be a slight trimming required to suit the dash. 

(Please note - depending on individual skill level -> this frame may require professional installation ) 

This kit is designed to suit universal trapezoid shaped radios such as various 9" Android Head units, Pioneer DMH-AP6650BT, and Kenwood DMX80AXS, etc. Unit needs to be mounted on the frame.

It will not suit standard DIN or double DIN sized radios from any manufacturer.