Learn how to setup Extnix wireless Apple CarPlay and Android Auto head unit with this complete step-by-step setup guide. This specific installation is in a Toyota Hilux N70 (2012-2015) Manual A/C model, however the same setup process applies to most Extnix infotainment systems across different vehicles.
🔧 This specific unit is installed in: Toyota Hilux N70 (2012–2015) – Manual A/C models
📦 Check Extnix full rage of the Hilux N70 Carplay head units here
What You'll Learn in This Setup Guide
This Extnix wireless Apple CarPlay setup guide covers everything you need to get your new head unit running perfectly:
- How to configure Wireless Apple CarPlay and Android Auto
- How to adjust system settings for best performance
- How to change reverse camera video input settings
- How to configure steering wheel controls
- How to switch between front and rear microphone
- How to delete and reinstall applications
- How to clear system memory and perform housekeeping
- How to change home screen theme and icons
Compatible Extnix Models
The configuration steps in this video also apply to Extnix systems installed in Toyota LandCruiser, Mitsubishi Pajero, Ford Ranger, Isuzu D-MAX, Nissan Navara, Mazda BT-50 and other compatible vehicles.
Why Choose Extnix?
Our head units feature wireless CarPlay and wireless Android Auto, fast boot-up time, high-brightness HD touchscreen, plug-and-play installation and Australian support and warranty with perfect factory dash fitment.
Before You Start — What You'll Need
Before beginning your Extnix wireless Apple CarPlay setup, make sure you have the following ready:
- Your iPhone running iOS 14 or later with Bluetooth and WiFi enabled
- Your vehicle running (not just ignition on) for stable power
- The Extnix head unit fully installed and powered on
- Your steering wheel control adaptor connected if applicable
Common Setup Questions
Will wireless CarPlay work with my iPhone?
Wireless Apple CarPlay is compatible with iPhone 6 and later running iOS 14 or above. Simply enable WiFi and Bluetooth on your iPhone and your Extnix unit will automatically detect and connect.
Do I need to pair my phone every time?
No — once initial setup is complete, your iPhone will automatically connect to wireless CarPlay every time you start your vehicle.
Can I use Android Auto as well?
Yes — your Extnix head unit supports both wireless Apple CarPlay and wireless Android Auto. Android users will need the Android Auto app installed on their device.
What if my reverse camera isn't showing correctly?
This video covers how to adjust your reverse camera input settings. If you're still experiencing issues contact our Australian support team on 1300 096 212.
Need Help?
Our Australian support team is ready to assist. Contact us on 1300 096 212 or visit our support centre at extnix.com.au.
2 comments
I have an Extnix unit in my 79 series landcruiser and every time I start the car the head unit does a full reboot and settings are reset to a default setting. I have no idea how to fix this situation.
Any help would be appreciated.
Just bought a unit for a 2012 Honda Accord, I have not been able to get the sound working though. Do you have install instructions for this your off car? Thank you